Key storage diseases: symptoms, risk factors and control
Why 2027 is a higher-risk storage year
The 2027 harvest was characterised by persistently wet soil conditions through August and September in many parts of England and Scotland. This created several compounding disease risk factors: delayed haulm destruction allowing P. infestans to build further; wet soil at harvest preventing complete skin set; and mechanical damage from difficult lifting conditions increasing entry points for Fusarium and Phoma. Tubers going into store in autumn 2027 carry a higher background inoculum load than in the drier 2026 or 2025 harvests.
The priority in this season is rapid, controlled curing followed by swift temperature reduction to the store target. Time spent at temperatures above 8°C after harvest is the primary driver of silver scurf and dry rot development — every extra week at warm temperature multiplies the initial inoculum. See the potato harvest and storing article and the potato harvest management guide.
Store ventilation management for disease control
Ventilation serves two separate functions in potato storage: temperature management (drawing in cool external air) and humidity management (removing CO₂, ethylene and water vapour). In disease management terms, humidity control is critical — high relative humidity (above 95%) in the interstices between tubers encourages silver scurf sporulation and spread. However, drawing in external air that is too cold or too humid can cause condensation on tuber surfaces — equally damaging.
After curing, switch to recirculation-dominant ventilation to maintain temperature without introducing external moisture. Introduce fresh air only when the dew point of external air is lower than the store dew point — most store management systems with humidity sensors can automate this. See the transpiration glossary entry for background on water vapour management principles.