Research

Maize grain quality in 2027: dry matter, starch and the drying cost decision

Grain maize harvest timing in 2027 is finely balanced — early moisture data from trial sites shows wide variation between varieties. Here's how to read dry matter content, set moisture targets, and decide when drying cost outweighs waiting.

Dry matter and moisture at key harvest stages

StageDM%Moisture%Notes
Black layer formation (physiological maturity) 55–60% 40–45% Grain fill complete; no further dry matter accumulation
Field drying begins 60–68% 32–40% Natural drying; rate depends on temperature and humidity
Optimum combining window (grain) 68–75% 25–32% Harvest efficiency and quality balance; drying cost manageable
Combine-ready target (min drying) >70% <30% Lower drying energy; increased lodging and ear rot risk if delayed
Store intake maximum (unventilated) 86%+ <14% Safe long-term storage without ventilation; typically requires drying

2027 season context

The 2027 growing season saw above-average temperatures through July and August across most of England and Wales, promoting strong dry matter accumulation in grain maize. However, a wet September has slowed field drying significantly relative to a normal year — early moisture readings from NIAB trial sites show the majority of varieties arriving at combine readiness 7–10 days later than the five-year average. Growers with dryer capacity will need to weigh the drying cost against the ear rot risk that accompanies a prolonged damp standing period. See AHDB Maize ↗ for the latest variety dry-down data.

For the 2027 season specifically, the maize variety performance data released in August suggests that early FAO varieties (FAO 180–240) are running 2–4% drier than mid-season types at equivalent dates — confirming that early variety selection is paying dividends for growers facing a late, wet autumn. If you grew a mid-season variety (FAO 260–330) and moisture readings are above 32%, run the drying cost calculation before committing to a delay.

Starch, energy value and market specifications

The primary grain maize market in the UK is bioethanol (fermentation plants in Lincolnshire and the East Midlands) and the compound feed industry. Bioethanol specifications typically require moisture below 15% and starch content above 68% DM. Compound feed buyers are less starch-sensitive but share the moisture specification. In 2027, contracts from major bioethanol buyers are reportedly offering premiums for deliveries with verified starch above 70% DM — achievable with well-chosen early varieties in a warm season.

For on-farm grain storage considerations see the grain storage management guide. For the establishment and in-season management that underpins grain quality see the maize establishment guide and maize disease and weed management guide. The harvest maturity glossary entry covers the physiological principles behind harvest timing decisions.

The drying cost calculation

Drying grain maize from 28% to 14% moisture requires removing 14 percentage points. At a typical energy cost of £2.00 per tonne per point, that is £28/tonne in drying cost alone, plus handling and storage. At current maize contract prices, this represents a significant proportion of margin — typically 15–25%. Growers with access to efficient continuous-flow dryers can reduce this cost; batch dryers are significantly more expensive per point. The decision to wait for field drying versus harvest-and-dry must incorporate lodging risk, ear rot progression, and the opportunity cost of a combine that could move to other crops.

Frequently asked questions

How do I judge when maize grain is ready to harvest?
The primary indicator is black layer formation at the tip of the grain — a visible black layer at the point where the kernel attaches to the cob indicates that physiological maturity has been reached and dry matter accumulation has stopped. After black layer, further field time only dries the grain (useful) or increases lodging, ear rot and field loss risk (harmful). Use a grain moisture meter on samples from multiple cobs across the field to confirm moisture. Target a combining moisture of 25–32% for most dryer-equipped operations. Varieties listed in the AHDB Maize RL ↗ include dry-down ratings that reflect field drying speed after black layer. See the maize harvest management guide for the full assessment sequence.
What is the economic breakeven for drying versus waiting?
The drying cost versus field waiting trade-off depends on: (1) your dryer fuel cost per percentage point of moisture removed; (2) the field drying rate at current temperatures (typically 0.3–0.8% per day in September–October); (3) harvest and yield loss risk from lodging, ear rot and weather. A rough guide: drying costs approximately £1.50–2.50 per tonne per percentage point removed (depending on fuel type and dryer efficiency). If field drying removes 1% per day and your current moisture is 30%, waiting 7 days costs nothing on drying — but if the field is at lodging risk or ear rot is progressing, the calculation changes. Check energy costs with your dryer manufacturer. See the maize harvest guide and grain storage guide.
How does starch content affect maize value?
Grain maize value is primarily determined by starch content (typically 65–72% of dry matter) for both bioethanol and feed markets. Higher starch maize commands a premium in the bioethanol market. Starch content is maximised by harvesting at or near physiological maturity rather than very late (when starch can degrade in wet conditions with ear rot). Weather during grain fill — warm dry conditions — typically produces higher starch grain. Maize varieties differ in starch potential; the AHDB Maize RL ↗ lists starch ratings. For the full crop management context see the maize establishment guide.
What causes ear rot in grain maize and how do I manage it?
Ear rot in grain maize is caused primarily by Fusarium spp. (Fusarium ear rot, producing fumonisins and other mycotoxins) and Gibberella zeae (producing deoxynivalenol, DON). Risk factors include: prolonged wet weather at silking, insect damage to ears (creating entry points), dense canopies, and susceptible varieties. Management: (1) choose varieties with ear rot resistance ratings on the AHDB RL ↗; (2) harvest promptly at black layer in high-risk seasons — do not allow damp ears to sit in the field through October; (3) dry grain to below 14% as quickly as possible to prevent mycotoxin accumulation in store. See the maize disease and weed management guide and the mycotoxin glossary entry.
How do I calibrate my grain moisture meter for maize?
Grain moisture meters must be calibrated for maize specifically — different crop calibrations are used for wheat, barley, maize etc. Use the maize calibration setting on your meter. Take samples from at least 5 cobs per field, collecting grain from the middle third of each cob (tip and butt grain vary in moisture). Allow the sample to reach ambient temperature before testing — temperature significantly affects readings. Cross-check against a laboratory oven-dry test (105°C for 24 hours) at least once per season to verify meter accuracy. A 1–2% error in moisture reading at 30% moisture translates to a meaningful drying cost difference per tonne.