Season

Maize harvest timing: reading dry matter and grain hardline

How to judge maize maturity for whole-crop silage or grain harvest — dry matter targets, milk-line progression and GDD.

7 Oct 2026 · UK & Northern Europe · AHDB Cereals & Oilseeds ↗

Why timing matters more than the calendar

Maize harvest date is not fixed by the calendar — it is fixed by dry matter content, and DM accumulation depends entirely on the heat the crop has received since sowing. A cool summer can push harvest 2–3 weeks later than the same hybrid in a warm year. Getting timing right matters commercially: silage harvested outside the 28–35 % DM window either produces excessive effluent and poor fermentation (too wet) or hard, poorly digestible grain (too dry).

The AHDB maize growing guide ↗ is the most comprehensive UK reference for variety selection, agronomic management and harvest timing across the range of UK growing conditions.

Reading the milk line

The milk line is the most practical in-field maturity indicator. Split a cob longitudinally and look at the grain cross-section from the side: a distinct boundary separates the opaque, starchy lower portion from the milky upper portion. As the grain matures, this line moves from the tip downward.

  • Milk line at 25 % depth: DM typically 24–28 % — too wet for most uses.
  • Milk line at 50 % depth (half-milk line): DM typically 28–32 % — optimal for whole-crop silage.
  • Milk line at 75 % depth (full dent / black-layer imminent): DM typically 32–38 % — upper end of silage window; approaching grain harvest stage.
  • Black layer formed: Grain physiologically mature. DM typically 38–45 % in the field.

University of Minnesota Extension ↗ provides illustrated guidance on milk-line assessment used internationally.

Using GDD to plan ahead

Accumulated growing degree days (GDD above 10 °C base) from sowing give a reliable forecast of harvest timing. UK forage hybrids at FAO class 180–250 typically reach whole-crop silage stage at 1,000–1,200 GDD. Tracking GDD through the season using Open-Meteo temperature data ↗ allows forward planning of contractor bookings and clamp management. The FarmTheGuide GDD glossary entry explains how to calculate and track accumulation.

For grain maize (where grown in the UK), the target is black-layer formation at commercially viable moisture — typically below 30 % for on-farm drying or below 25 % for direct combining without drying. NIAB maize research ↗ includes UK-specific hybrid maturity data across trial sites.

Frequently asked questions

What dry matter percentage should whole-crop maize silage be harvested at?
Target whole-crop maize silage at 28–35 % dry matter (65–72 % moisture). Below 28 % DM the crop is too wet — effluent losses are high and fermentation is poor. Above 35 % DM grain becomes too hard to crack in the clamp, reducing digestibility. AHDB maize guide ↗ gives DM targets by use (dairy, beef, biogas).
How do I assess maize dry matter in the field?
The quickest field method is the squeeze test: grip a cross-section of stem and cob in your fist — if juice runs freely, DM is below 28 %; if dry with little juice, DM is above 35 %. For accuracy, take a sample of 5–10 plants, chop them, and weigh a known fresh sample then dry it at 80 °C for 24 hours. Kingshay forage management ↗ provides laboratory DM testing services for UK farms.
What is the milk line and how does it indicate maturity?
The milk line is the visible boundary between the soft, milky upper portion of the maize grain and the harder, starchy lower portion. It progresses from the top of the grain (tip) downward as the grain matures. At half-milk line (milk-line at 50 % grain depth), whole-crop DM is typically 28–32 %. At full dent (three-quarter milk-line), DM is typically 32–38 %. University of Minnesota Extension ↗ has a detailed milk-line assessment guide.
Can I use growing degree days to predict maize harvest date?
Yes. Maize maturity is closely tied to heat accumulation above a base temperature of 10 °C. Most UK forage maize hybrids are FAO class 180–250, requiring 1,000–1,200 °C-days from sowing to whole-crop silage stage. Open-Meteo ↗ provides hourly temperature data to calculate accumulated GDD from a known sowing date. The FarmTheGuide growing degree days glossary entry explains the calculation.
How does frost affect the harvest timing decision?
A killing frost (below −2 °C for several hours) accelerates DM rise rapidly as the plant dies and desiccates — DM can increase 2–4 percentage points per day after a hard frost. This can push a borderline crop to over 38 % DM very quickly, making it too dry for good silage fermentation. Monitor closely after any frost event. Met Office agricultural weather ↗ provides frost probability forecasts for harvest planning.