Grow

Potato Nutrition Management

Potato Nutrition Management guide.

5 min read

Potato nutrient requirements: key parameters

NutrientTypical rateTimingFormsNotes
Nitrogen (N) 150–250 kg N/ha Split: planting + 2–3 × during haulm growth Ammonium nitrate, compound, protected urea Rate varies hugely by variety end use: processing (crisps/chips) needs lower N for dry matter; fresh market different spec. SNS and RB209 drive rate
Potassium (K) 200–400 kg K₂O/ha Mostly at planting; split possible on sandy soils Muriate of potash (pre-planting), sulphate of potash (in-season) Highest K demand of any arable crop; high K lowers dry matter and specific gravity — critical to manage for processing varieties
Phosphorus (P) 100–250 kg P₂O₅/ha At or before planting (seedbed) Triple superphosphate, DAP, compound Important for root development and tuber initiation; place near seed if possible at low P index
Magnesium (Mg) 75–150 kg MgO/ha At planting or foliar in-season Kieserite, Epsom salts (foliar) Deficiency common on sandy or acidic soils; affects leaf greenness and haulm retention
Calcium (Ca) Soil Ca not typically limiting; foliar 10–15 kg Ca/ha Foliar: from tuber initiation to bulking Calcium chloride, calcium nitrate foliar Internal quality disorders (internal rust spot, hollow heart) linked to Ca supply during tuber bulking — key for fresh/packing grades
Boron (B) 0.5–2 kg B/ha foliar Early haulm growth Solubor, Borocal foliar Deficiency on light soils causes hollow heart and internal browning; important on peaty or sandy soils

Step-by-step potato nutrition programme

  1. 1

    Determine nitrogen rate by end use, variety and SNS class

    Potato nitrogen management is more complex than cereal crops because the optimal N rate differs fundamentally by end use. Processing varieties grown for crisps or chips require high dry matter (DM) and specific gravity — excess nitrogen reduces DM and elevates reducing sugars (glucose and fructose), causing excess browning during frying. Target DM for crisp varieties: 22–24%+ at harvest; every 10 kg N/ha above the optimum reduces DM by approximately 0.1 percentage points. Packing and fresh market varieties have less strict DM targets but must achieve uniform tuber size and skin finish — excess N stimulates excessive haulm growth at the expense of tuber set. Seed potato crops: moderate N rate to achieve appropriate haulm growth for bulking without excessive stem elongation. Begin with the RB209 variety-specific N rate table, adjusted for SNS class, crop rotation and any organic inputs. On SNS class 3–4 soils, N rates should be reduced by 25–40 kg/ha relative to the base table rate. Never apply more than the total recommended rate in a single application — always split across at least two timings.

  2. 2

    Plan potassium management carefully for processing quality

    Potato crops have the highest potassium demand of any UK arable crop at 200–400 kg K₂O/ha per season. However, the form and timing of K application has a significant quality impact: muriate of potash (KCl) is the cheapest K source but the chloride component at high rates can reduce specific gravity and DM in processing varieties. For processing crops: use sulphate of potash (K₂SO₄) at rates above 200 kg K₂O/ha, or split to apply muriate of potash in the previous autumn (allowing chloride to leach) and sulphate of potash for in-season applications. For non-processing crops: muriate of potash is generally acceptable — apply at or before planting. On soils with K index 3–4, maintenance K may be zero for one season, with only replacement for offtake (typically 200–250 kg K₂O/ha/season for high-yield crops). Use a recent soil K test and K balance calculation to justify rates, especially where manures have been applied.

  3. 3

    Apply phosphorus for establishment and tuber initiation

    Phosphorus is critical in potatoes for early root development, stolon development and tuber initiation. Unlike cereals, where P is most limiting at low soil index, potatoes respond to P even at moderate soil index due to the high P demand during tuber bulking. At P index 2: 150–200 kg P₂O₅/ha as a seedbed application is standard. At P index 3+: maintain with replacement for offtake (approximately 50–70 kg P₂O₅/ha). Placed P close to the seed tuber (banded at planting) is more efficient than broadcast — particularly important on sandy soils or in cold spring conditions where root exploration is limited. Di-ammonium phosphate (DAP) at planting also provides some N and encourages quick establishment. Potatoes have high P removal in the harvested crop: approximately 100 g P₂O₅ per tonne of tubers — a 50 t/ha crop removes 50 kg P₂O₅/ha. The <a href="/guides/soil-sampling-testing">soil sampling guide</a> covers soil P index assessment.

  4. 4

    Manage calcium to prevent internal quality disorders

    Calcium deficiency in potato causes a range of internal quality disorders that are invisible at harvest but cause costly rejections after cutting/frying. Internal rust spot (IRS): brown flecks in the tuber flesh, most severe during periods of rapid tuber growth after moisture stress. Hollow heart: enlargement and collapse of the pith in large tubers during rapid cell division, linked to boron deficiency and uneven water supply. Calcium in potatoes moves only in xylem (via transpiration) and cannot be redistributed from older tissue — so continuous supply to new tuber cells during bulking is essential. Foliar calcium applications (calcium chloride or calcium nitrate, 10–15 kg Ca/ha total season across 3–5 splits from stolon initiation through tuber bulking) supplement xylem-delivered Ca during critical growth phases. Irrigation management is critical — calcium delivery to tubers is reduced during moisture stress when transpiration falls.

  5. 5

    Address magnesium, boron and micronutrient deficiencies with targeted foliar programmes

    Potato foliage can develop multiple micronutrient deficiencies in-season, particularly on light, acidic or high-OM soils. Magnesium deficiency: interveinal chlorosis on older leaves; most common on sandy acidic soils or after heavy rain on recently limed fields. Treat with Epsom salts foliar (MgSO₄, 15 kg/ha in 200 L/ha water) at first symptoms; two applications 2 weeks apart usually sufficient. Boron deficiency: causes hollow heart and poor stolon development — apply Solubor or Borocal (0.5–1 kg B/ha foliar) at canopy closure on high-risk soils (sandy, high-pH, peaty). Manganese deficiency on high-pH soils: foliar manganese sulphate as for cereals. Iron deficiency in highly alkaline conditions: chelated iron foliar. The key principle for all micronutrient applications: confirm deficiency by symptom observation and soil or leaf tissue test before applying. Blanket micronutrient applications without confirmed deficiency rarely show economic return. See the <a href="/glossary/nitrogen-use-efficiency">NUE entry</a> for the broader context of nutrient efficiency in intensive crops.

The quality-nutrition link in potatoes

More than in any other UK arable crop, potato nutrition directly controls commercial quality outcomes. The link between N rate and dry matter for processing varieties, between K form and specific gravity, and between Ca supply and internal quality is quantifiable and commercially critical. Getting nutrition wrong does not simply reduce yield — it can cause total rejection of the crop from processing contracts, loss of premiums, or downgrading to animal feed markets at a fraction of the contracted value.

Build a field-by-field nutrition audit: soil test every 3–4 years for P, K, Mg and pH; record all inputs including organic manures; reconcile N inputs against RB209 SNS class; post-harvest, check dry matter, specific gravity and reducing sugars from a sample of stored tubers. These records support precision nutrition planning for the following season. See the soil sampling guide and the NUE entry.

Frequently asked questions

How does nitrogen management differ for processing versus fresh market potatoes?
Processing varieties (crisps, chips): N management prioritises dry matter and low reducing sugars. Excess N reduces dry matter content (target ≥22% for crisps) and elevates glucose/fructose (target <0.2% for crisps — low reducing sugars prevent Maillard browning during frying). Total N rate: typically 150–190 kg N/ha on SNS class 2–3 soils; reduce by 20–30 kg/ha on high SNS soils. Split into 2–3 applications: planting + early haulm + flag split (if needed). Fresh market and packing varieties: N management prioritises uniform tuber size, skin finish and cosmetic appearance. Slightly higher N rates are acceptable (180–220 kg N/ha) but timing is adjusted to promote haulm before tuber set. Seed potatoes: moderate N to control stem elongation. AHDB RB209 ↗ provides variety-group-specific N rate tables.
Why does potassium form matter for potato quality?
The form of potassium applied to potatoes significantly affects tuber quality, particularly for processing crops. Muriate of potash (KCl, potassium chloride): cheapest and most widely used K fertiliser; but the chloride ion reduces specific gravity and dry matter — particularly at rates above 200 kg K₂O/ha. Each 100 kg K₂O/ha of KCl reduces specific gravity by approximately 0.001–0.002 g/cm³. For processing varieties where dry matter is a commercial specification: either use sulphate of potash (K₂SO₄) in-season, or apply muriate of potash in the autumn before the previous harvest to allow chloride to leach over winter. Sulphate of potash (SOP): no chloride penalty; used widely for processing crops; costs 2–3× more than muriate. The trade-off: extra cost of SOP vs. risk of DM specification failure. On soils above K index 3, reduce K rates sharply — over-application of K has a direct negative effect on DM. See the potassium glossary entry.
What causes internal rust spot in potatoes and how is it prevented?
Internal rust spot (IRS) in potatoes is caused by calcium deficiency during tuber bulking, typically exacerbated by: (1) periods of rapid growth after moisture stress (dry spell followed by rain/irrigation); (2) high-temperature stress; (3) excessive nitrogen or potassium reducing Ca uptake; (4) soil compaction limiting root access to Ca. IRS appears as brown necrotic spots or flecks in the tuber flesh — invisible at harvest but revealed on cutting or processing; causes significant rejection from processing contracts. Prevention strategies: (1) foliar calcium applications (calcium chloride or calcium nitrate, 3–5 applications of 3–4 kg Ca/ha from stolon initiation through tuber bulking); (2) maintain consistent soil moisture throughout bulking — avoid drought-stress/re-wetting cycles; (3) ensure potassium rates are not excessive (K competes with Ca for uptake); (4) check soil and tissue Ca levels if IRS is recurring. Boron deficiency (hollow heart) is distinct from IRS — both are internal quality disorders but have different causal mechanisms. See the potato agronomy guide.
When and how should I apply magnesium to potatoes?
Magnesium (Mg) in potatoes is required for chlorophyll production and enzyme function. Deficiency shows as interveinal chlorosis on older/lower leaves — the older leaves turn yellow between the veins while the veins stay green; in severe cases leaves turn brown and die back prematurely, reducing photosynthesis and yield. High-risk soils: light, sandy, acidic soils below pH 6.0; soils recently limed with calcitic limestone (adds Ca without Mg); high K soils (K and Mg compete for uptake). Soil application: kieserite (MgSO₄·H₂O) at 250–500 kg/ha broadcast before planting; provides season-long Mg. Foliar application: Epsom salts (MgSO₄·7H₂O, 10–15 kg/ha in 200–400 L/ha water) at first symptom appearance; repeat after 2–3 weeks. Foliar Mg acts quickly but does not address underlying soil deficiency. For persistent Mg deficiency: apply kieserite before planting every 2–3 years and check soil K:Mg ratio — K:Mg above 5:1 indicates K-induced Mg deficiency. See the NPK glossary entry.
How do I manage boron deficiency in potatoes?
Boron (B) deficiency in potatoes manifests as: (1) hollow heart — a cavity at the centre of large tubers caused by insufficient cell division during rapid tuber growth; (2) internal browning; (3) in severe cases, cracked, abnormal tubers. Boron is essential for cell wall formation and cell division — without adequate B, the rapidly dividing cells in the growing tuber centre fail and collapse. Risk factors: sandy, peaty or very high organic matter soils; alkaline soils (pH>7.0); dry conditions (B is taken up in soil water — drought limits supply); varieties with large tuber size potential (large tubers have higher internal B demand). Prevention: foliar Solubor or Borocal (0.5–1 kg B/ha in 200 L/ha water) applied at early haulm stage (before stolon initiation) and again at tuber initiation. Soil boron applications (borax, 1–2 kg B/ha) can be applied at planting but have lower reliability than foliar. Key: boron deficiency cannot be corrected once tubers have initiated and hollow heart has begun. Apply preventatively on high-risk fields. Soil test B is available from most agrochemical labs. AHDB Boron guidance ↗.