Nutrition

Potassium (K)

Unit: kg K₂O/ha

A macronutrient essential for water regulation, enzyme activation, sugar transport and disease resistance, applied based on soil index and crop offtake to maintain RB209 target levels.

Potassium is taken up in larger quantities than any other nutrient by most crops — potatoes and sugar beet in particular have very high K requirements. It does not form structural components but regulates turgor pressure (via stomatal control), activates over 60 enzymes, and is essential for phloem loading of sugars. K leaches on sandy soils but is fixed on clay soils. Deficiency shows as leaf scorch starting at the margins. Soil K index (0–4+) in RB209 determines maintenance and build-up requirements.

Soil K index, status and RB209 recommendations

K IndexSoil K (mg/L)StatusWheat maintenancePotato maintenanceAction
0 <60 mg/L (sandy) / <100 mg/L (clay) Deficient +60 kg K₂O/ha +350 kg K₂O/ha Build up — apply maintenance plus build-up allowance
1 60–120 mg/L (sandy) / 101–150 mg/L (clay) Low +30 kg K₂O/ha +280 kg K₂O/ha Build up — apply maintenance plus half build-up
2 121–180 mg/L (sandy) / 151–250 mg/L (clay) Target Offtake only Offtake only Maintenance — replace offtake
3 181–250 mg/L (sandy) / 251–400 mg/L (clay) High Reduce / nil Reduce / nil Draw down — apply nil or below offtake to run down K
4+ >250 mg/L (sandy) / >400 mg/L (clay) Very high Nil Nil Do not apply K — risk of luxury uptake and induced Mg deficiency

Potassium in plant physiology

Potassium is unique among the macronutrients in that it forms no structural components in the plant — it is not incorporated into organic molecules in the way nitrogen, phosphorus and sulphur are. Instead, K⁺ performs regulatory functions: it is the primary osmoticum maintaining turgor pressure in cells (driving cell expansion and stomatal opening and closing), activates over 60 enzymes (including those involved in protein synthesis and starch formation), and is essential for phloem loading of sucrose — the transport form of assimilated carbon. Its mobility in the phloem means K is efficiently retranslocated from old to young tissues, so deficiency shows first on older leaves as marginal scorch (necrosis from the leaf tip and margins inward).

Potassium in the soil system

Soil potassium exists in four fractions of decreasing availability: (1) solution K (immediately available); (2) exchangeable K on cation exchange sites (available within the season); (3) non-exchangeable K fixed between clay mineral layers (slowly available over years); (4) K in primary minerals (unavailable on agronomic timescales). Routine soil analysis measures exchangeable K and reports it as the K index. The balance between fixed and exchangeable K is particularly important on clay soils — potassium can be released from fixed positions over a season, moderating deficiency. See the cation exchange capacity glossary entry for the exchange site mechanism.

Potassium and crop quality

Adequate K is directly linked to crop quality parameters across multiple crops: in potatoes, K affects tuber specific gravity, dry matter content, chip colour and cooking quality (insufficient K causes blackening); in cereals, K affects grain specific weight and protein content; in sugar beet, K-N ratio affects extractable sugar. The interaction between K and other nutrients is also important: K antagonises Mg and Ca uptake, so high K applications can induce deficiency symptoms in these nutrients even where soil Mg and Ca are adequate. See the potato agronomy guide and soil sampling and testing guide for practical nutrient management applications.

Frequently asked questions

How much potassium does a wheat crop remove at harvest?
Potassium offtake in harvested grain is relatively modest — approximately 4–6 kg K₂O/tonne of grain, so a 9 t/ha wheat crop removes around 36–54 kg K₂O/ha in the grain. However, wheat straw contains a much larger proportion of the total K uptake: straw typically contains 10–15 kg K₂O per tonne, so a 5 t/ha straw yield adds 50–75 kg K₂O returned to the field if incorporated. If straw is sold off farm, total K removal (grain + straw) is 90–125 kg K₂O/ha — a substantially higher figure that must be accounted for in the nutrient management plan. This is why straw management policy significantly affects the K balance on heavy-straw-removal farms. See the NPK glossary entry and the soil sampling and testing guide for K index management.
Why is potassium deficiency so serious in potato crops?
Potatoes are the highest K-demanding arable crop in the UK, with total K uptake at 300–500 kg K₂O/ha per season and most of this concentrated in tubers (70–80% of total K remains in the harvested tuber). Potassium is essential for: (1) tuber size and yield — K drives cell expansion and osmotic adjustment in tubers; (2) specific gravity — K-deficient potatoes have lower specific gravity (important for processing specifications); (3) disease resistance — K-deficient crops are more susceptible to late blight (Phytophthora infestans) and common scab; (4) cooking quality — blackening after cooking is associated with low K:Mg ratio. Given the high K offtake, maintaining soil K index at 2 in potato fields requires substantial K applications — typically 250–350 kg K₂O/ha per crop. See the potato agronomy guide and phosphorus glossary entry for the broader nutrient management context.
What is the difference between potassium fixation and potassium leaching, and which soils are affected?
K fixation occurs on clay soils — particularly those containing 2:1 clay minerals (illite, vermiculite, smectite) where interlayer sites can trap K⁺ ions, making them temporarily unavailable to plants. Freshly applied K₂O can be fixed, especially in wet conditions, before it reaches the root zone. Strongly fixing soils may require higher K application rates to maintain crop availability. K leaching occurs on light sandy soils or peaty soils with low cation exchange capacity — K is not strongly adsorbed to negative exchange sites and can move with drainage water. On sandy soils at K index 0–1, split K applications are more efficient than single large applications in autumn. The soil texture and clay mineralogy therefore determine whether fixation or leaching is the primary management challenge. Heavy clay soils with illite: fixation risk. Sandy soils and peats: leaching risk. See the cation exchange capacity glossary entry for the underlying mechanism.
Can I over-apply potassium and what are the consequences?
Yes — over-application of potassium (soil K index 3 or above) has several negative consequences: (1) Induced magnesium deficiency — K⁺, Ca²⁺ and Mg²⁺ compete for the same root uptake channels; high K blocks Mg uptake, causing Mg deficiency symptoms (interveinal chlorosis on older leaves) even where Mg soil levels are adequate; (2) Luxury uptake — crops absorb K beyond their agronomic requirement, diluting other nutrients (particularly Mg) without yield benefit; (3) Economic waste — K fertiliser is a significant input cost; applying beyond maintenance is a direct financial loss; (4) Soil chemistry disruption — very high K in soil at K index 4 can displace Ca from exchange sites over time. The RB209 recommendation is to apply zero K at index 3 and to draw down soil K levels through crop offtake before resuming maintenance applications. See the soil sampling and testing guide for how to manage the K index across a rotation.
What are the best potassium fertiliser sources and how do they differ?
The main K fertiliser sources are: Muriate of potash (MOP, KCl) — the most widely used; 60% K₂O, cheapest source, but contains chloride which can reduce sugar beet quality at high rates and should be avoided on certified organic crops; Sulphate of potash (SOP, K₂SO₄) — 50% K₂O plus 46% SO₃; preferred for crops sensitive to chloride (potatoes — reduces chip colour and cooking quality when applied close to planting; brassicas; vegetables); higher cost than MOP; Kainit / Polysulphate — lower-analysis materials with additional Mg and S; used where multiple nutrient deficiencies need addressing; Manures and digestate — livestock slurries and digestates can supply significant K (cattle FYM 6 kg K₂O/t; pig slurry 3 kg K₂O/m³) — should be accounted for in the nutrient plan. For potato crops, SOP is strongly recommended over MOP to avoid quality problems. See the NPK glossary entry for the broader fertiliser context.