Soil

Soil compaction

The reduction in soil pore space caused by pressure, which restricts root growth, water movement and gas exchange — one of the most yield-limiting soil physical problems on UK arable farms.

<strong>Soil compaction</strong> can be surface (0–15 cm, from tillage and traffic), subsoil (15–40 cm, from heavy axle loads) or deeper (from repeated subsoil disturbance). Understanding <strong>what is soil compaction</strong> and recognising <strong>soil compaction symptoms</strong> — stunted seedlings, ponding water, shallow rooting, drought stress in wet years — is the first step toward remediation. Penetrometer resistance above 2–3 MPa significantly restricts root elongation. Knowing <strong>how to reduce soil compaction</strong> through controlled traffic farming, low-pressure tyres and timing field operations for dry conditions is more cost-effective than cure. <strong>Subsoil compaction management</strong> requires deep loosening in dry conditions followed by cover crops to maintain the loosened structure. Assessment before remediation decisions prevents unnecessary cost — see <a href="https://ahdb.org.uk/knowledge-library/soil-compaction" target="_blank" rel="noopener noreferrer">AHDB soil compaction guidance</a>.

Types of soil compaction

TypeDepthPrimary causeSymptomsRemedy
Surface 0–15 cm Trafficking in wet conditions, repeated cultivation at same depth Capping, slow infiltration, stunted seedlings Cultivation + cover crops
Plough pan 15–25 cm Annual tillage at the same depth Roots deflect at tillage depth Subsoiling once, change tillage depth
Subsoil 25–45 cm Heavy axle loads (>6 t) on moist subsoil Drought stress in wet weather, yield loss Deep loosening in dry conditions
Deep subsoil >45 cm Very heavy loads (>10 t), tracked vehicles Persistent waterlogging, poor drainage Very difficult; controlled traffic farming

How soil compaction restricts crop growth

Understanding what is soil compaction starts with soil pore space — the medium through which roots move. In a healthy loam, 25–35 % of soil volume is air-filled at field capacity. When compaction reduces air-filled porosity below 10 %, oxygen supply to roots becomes limiting — root respiration requires oxygen, and waterlogged, compacted zones become anaerobic. Root elongation essentially stops when penetration resistance exceeds 2–3 MPa (measured with a standard cone penetrometer at field capacity).

The consequences cascade: restricted rooting means reduced access to water (drought stress even in wet years), reduced nitrogen and potassium uptake from deeper soil layers, and delayed maturity. AHDB soil compaction guidance ↗ summarises yield loss evidence across UK crop types.

Compaction and soil water

Compaction directly reduces the soil's hydraulic conductivity — its ability to conduct water. In a compacted layer, water accumulates above the restriction, causing waterlogging that further damages soil structure and root function. This is the mechanism behind the paradox of compacted fields that simultaneously suffer drought stress in dry spells (roots can't access deep moisture) and waterlogging in wet periods (water can't drain through the compacted layer).

For the water management perspective, effective rainfall and irrigation scheduling are both affected by compaction — irrigation applied to compacted soil pools above the restriction layer rather than penetrating to the root zone. See the effective rainfall glossary entry and the irrigation scheduling guide for how soil structure interacts with water management decisions.

How to reduce soil compaction — prevention is more cost-effective than cure

Knowing how to reduce soil compaction starts with prevention. Subsoil compaction management is essential because subsoil compaction — once formed — is very difficult to remediate. Common soil compaction symptoms include ponding water, stunted seedlings, shallow rooting and drought stress even in apparently wet conditions. Deep loosening (subsoiling) at the right time and depth can break the compacted layer, but re-compaction occurs within a season if the source of load is not addressed. Controlled traffic farming (CTF), low ground pressure tyres, and avoiding field operations on wet soils are the primary prevention tools. CTF Europe ↗ provides design and implementation resources for permanent traffic lane systems.

For a practical field assessment approach — penetrometer use, profile pits, VESS scoring and subsoiling decisions — see the soil compaction assessment guide. The soil organic matter guide covers the role of OM in maintaining soil structure and resilience to compaction. The cover crop glossary entry explains how deep-rooted covers contribute to long-term compaction prevention.

Frequently asked questions

What is soil compaction and why does it matter?
Soil compaction is the reduction in soil pore space — the air- and water-filled gaps between soil particles — caused by mechanical pressure. When pore space decreases, root growth is physically restricted, water infiltration slows, and gas exchange (oxygen in, CO₂ out) is impaired. The result: crop roots cannot explore the full soil profile for water and nutrients, leading to yield loss that can range from 5 % in mild cases to 30 % in severely compacted soils. AHDB soil compaction guidance ↗ and the James Hutton Institute research ↗ provide the UK evidence base for compaction impacts.
What causes subsoil compaction?
Subsoil compaction (below 25 cm) is caused primarily by heavy axle loads when soil is above field capacity moisture. Modern combine harvesters, large slurry tankers, potato harvesters and beet harvesters can exceed 10 tonnes per axle. At these loads, stress travels deep into the soil profile, compressing aggregates permanently. Unlike surface compaction, subsoil compaction does not heal naturally within a farming lifetime — relief requires deep mechanical loosening. SoilCare project research ↗ found that subsoil compaction from a single pass of a 10-tonne axle load can remain measurable 10 years later. AHDB subsoiling guidance ↗ covers remediation.
How is soil compaction measured in the field?
The standard field tool is a cone penetrometer — a metal rod with a standardised cone tip pushed into soil at a constant rate. It measures penetration resistance in MPa or PSI at successive depths. A resistance >2 MPa indicates significant root restriction; >3 MPa is severe. Soil pits (digging to 40–60 cm) allow direct observation of root deflection, soil structure and mottling (waterlogging indicators). The VESS (Visual Evaluation of Soil Structure) score provides a standardised qualitative assessment. AHDB VESS guide ↗ provides photographic reference. See the soil compaction assessment guide for full field procedures.
Can cover crops cure soil compaction?
Cover crops with deep taproots — particularly Raphanus sativus varieties (tillage radish, oilseed radish) — can penetrate soft compaction layers and create biopores (channels) that aid water drainage and subsequent root penetration. These biopores persist after the root decomposes and can reach 40–60 cm depth in good growing conditions. However, cover crops cannot relieve severe compaction (>3 MPa) — roots cannot penetrate such high resistance. After mechanical loosening by subsoiling, deep-rooted cover crops help maintain the loosened structure and prevent rapid re-compaction. Groundswell soil health resources ↗ document biopore formation and duration. The cover crop glossary entry and cover crop establishment guide provide species and management detail.
How does controlled traffic farming prevent soil compaction?
Controlled traffic farming (CTF) permanently confines all field vehicle passes to fixed traffic lanes, leaving the majority of the field area untouched by wheel loads in any given season. Typical UK CTF systems use 12 m or 24 m traffic lane spacing matched to harvester or sprayer working widths. By concentrating compaction into the traffic lane (typically 15–20 % of the field area), the remaining 80–85 % of soil maintains its structure. Yield improvements of 5–15 % are consistently reported after conversion to CTF in UK studies. CTF Europe ↗ provides a full introduction to CTF implementation. AHDB CTF guidance ↗ covers UK farm economics and system design.