Nutrition

Phosphorus (P)

A macronutrient essential for energy transfer, root development and early crop establishment, applied as part of a nutrient management plan based on soil index.

Phosphorus is relatively immobile in soil — it does not leach readily but moves short distances by diffusion to root surfaces. Soil P index (0–4+ in RB209) determines whether maintenance, building or drawdown applications are appropriate. P deficiency causes purple coloration in young leaves, restricted root growth and poor establishment. In high-index soils, P applications can be reduced or stopped without yield penalty, banking the P that has been applied over many years.

P index and indicative maintenance rates (kg P₂O₅/ha)

IndexOlsen P (mg/kg)StatusWinter cerealSpring cerealRecommendation
0 <9 Very low 80 90 Build + maintenance dressing required
1 9–25 Low 70 80 Maintenance dressing recommended
2 26–45 Optimum 60 65 Maintenance dressing — replace offtake
3 46–70 High — — No P required — drawdown index
4+ >70 Very high — — No P — may pose environmental risk

Indicative rates for planning purposes only. Refer to RB209 for crop-specific recommendations based on yield expectation and index.

How phosphorus moves in soil

Phosphorus behaves very differently from nitrogen in soil. While nitrate moves freely with water through the soil profile, phosphate ions (H₂PO₄⁻ and HPO₄²⁻) are rapidly adsorbed onto the surfaces of iron and aluminium oxides that coat soil mineral particles. This adsorption is reversible but slow — P desorbs back into solution only as plants or microbes deplete P in the immediate vicinity.

Roots access P by growing towards it (root proliferation in P-rich zones) and by releasing root exudates — particularly organic acids — that solubilise P from the mineral surface. Mycorrhizal fungi dramatically extend the effective P capture radius by colonising roots and extending hyphae far beyond the root depletion zone. Management practices that damage mycorrhizal networks (fumigation, very high P applications) can reduce this natural P supply pathway. See the soil structure glossary entry for the role of fungal networks in soil health.

P budget and environmental regulation

Under the Farming Rules for Water (England), phosphorus applications must not exceed crop need at P index 2+. On P-index-3 soils, P applications are not permitted unless there is a specific agronomic justification. The Nutrient Management Guide RB209 forms the standard reference for legal compliance.

P loss to watercourses — even small amounts — causes eutrophication: algal blooms, oxygen depletion and fish kills. P loss pathways include surface runoff from recently applied fertiliser or manure, drainage from waterlogged soils, and erosion of P-rich topsoil. Buffer strips, avoiding P applications near watercourses, incorporating organic manures rapidly, and maintaining good soil structure all reduce loss risk. The soil drainage management guide covers practices that reduce surface runoff and therefore P loss risk.

Starter P and placement

Because P diffuses slowly in soil, seed-placed or band-placed starter P fertilisers can dramatically improve establishment on P-deficient or cold soils by putting P within a few millimetres of germinating roots. Compound fertilisers containing P are often used in seed-bed applications for this reason. On high P-index soils, starter P still improves early root architecture in cold springs — but the effect on final yield is small. Seed-placed P rates should be limited to 5–10 kg P₂O₅/ha to avoid salt damage on low-moisture soils. See the NPK glossary entry for compound fertiliser analysis and placement options.

Frequently asked questions

What is soil phosphorus index and how do I find out mine?
The soil phosphorus index is the RB209 classification (0–4+) that tells you whether your soil has sufficient P for crops and what rate to apply. It is measured by the Olsen P soil test (sodium bicarbonate extractable P), the standard UK method. You can find your P index on any recent soil analysis report from a UKAS-accredited laboratory. Index 2 (26–45 mg/kg Olsen P) is the optimum for most arable crops. At index 3 and above, no P fertiliser is needed — the soil has banked sufficient P from previous years. See the RB209 nutrient management guide ↗ for P recommendations by crop and index.
Why doesn't phosphorus leach like nitrate?
Phosphorus in soil solution is strongly adsorbed onto iron and aluminium oxide surfaces in the soil — it is held tightly and moves mainly by diffusion (a few mm per week) rather than mass flow with water. This means P does not leach down the profile like nitrate under normal conditions, and P fertiliser applied one year remains available in subsequent seasons. However, in very sandy soils with low oxide content, some P movement does occur. More importantly, in waterlogged or saturated soils, reductive dissolution of iron oxides can release bound P, which can then be lost in surface runoff or drain water. Managing soil structure and drainage reduces P loss risk. See the soil structure glossary entry.
How does soil pH affect phosphorus availability?
Phosphorus availability is strongly pH-dependent, with a peak between pH 6.0 and 7.0. Below pH 6.0, P is increasingly fixed by aluminium and iron ions, forming insoluble precipitates unavailable to plants. Above pH 7.5, P is fixed by calcium, forming calcium phosphate compounds that are also poorly soluble. At the optimum pH of 6.0–6.5 for most arable crops, P solubility is highest and P fertiliser efficiency is maximised. Liming acid soils therefore has a secondary benefit of releasing previously fixed P. See the soil pH glossary entry and the soil pH management guide.
What are the symptoms of phosphorus deficiency?
P deficiency typically causes purple or reddish coloration on the undersides of leaves (from anthocyanin accumulation), particularly in cold conditions when P uptake is impaired even if soil P is adequate. Affected crops show restricted root development — roots are short, stubby and poorly branched, which reduces water and nutrient uptake. Establishment is slow and plants look stunted. P deficiency is most common in high-index soils where soil temperature is low (spring-drilled crops in cold, wet conditions), in waterlogged soils (poor root aeration reduces P uptake), and in newly broken grassland with pH below 6.0. Foliar P sprays are ineffective — soil-applied P or starter fertilisers placed near the seed are the correct response.
What P fertiliser forms are available and which is best?
The main P fertiliser forms are: Triple superphosphate (TSP) — 46% P₂O₅, highly water-soluble, widely used; Mono-ammonium phosphate (MAP) — 11% N + 52% P₂O₅, combined N+P compound; Diammonium phosphate (DAP) — 18% N + 46% P₂O₅; Organic sources — FYM (typically 2–3 kg P₂O₅/t), slurry (0.5–1.5 kg P₂O₅/m³), digestate (1.5–3 kg P₂O₅/m³). For most situations, the cheapest source of P at the required analysis is the correct choice — all water-soluble P sources perform similarly in RCT comparisons. Organic P sources count towards the total P budget in a Fertilisation Plan under Farming Rules for Water. See the NPK glossary entry for more on fertiliser forms.