Nutrition

Boron

Symbol: B

Unit: g B/ha

An essential micronutrient critical for cell wall formation, pollen viability, sugar transport and seed/fruit development — oilseed rape and sugar beet are the UK crops most sensitive to boron deficiency.

Boron (B) is unique among micronutrients in being a non-metal and having an extremely narrow sufficiency range — the margin between deficiency and toxicity is smaller than for any other nutrient. Typical crop uptake is 50–300 g B/ha. B is required for cell wall pectin synthesis, pollen tube growth (critical for pod set in OSR), phloem transport of sugars and meristematic cell division. Deficiency symptoms in OSR: hollow stems, poor pod set and "blindness" at the growing point; in sugar beet: crown rotting ("heart rot"). Sandy, light-textured soils, acid soils and high-rainfall seasons are highest risk as B leaches readily. Applications of solubor (20 % B) or foliar sprays at stem extension give the best response in OSR. Avoid applying B to cereals unless soil analysis confirms deficiency as toxicity risk is real.

Boron sensitivity by crop: symptoms and application rates

CropSensitivitySymptomsRisk soilsApplication rate
Oilseed rape Very high Hollow stem; split main stem; poor pod set; reduced branching; distorted growing points Light sandy soils; spring drought; pH >7 0.5–1.0 kg B/ha soil; 100–200 g B/ha foliar (Solubor)
Sugar beet Very high Heart rot; internal browning of crown tissue; stunted inner leaves; death of growing point Sandy soils; low OM; post-liming 0.5–1.0 kg B/ha soil or foliar Solubor at rosette stage
Maize Medium Incomplete tassel development; barren cob tips; empty grain rows; leaf tip necrosis Sandy soils; drought; recent heavy lime 0.3–0.5 kg B/ha foliar at 6–8 leaf stage
Wheat/barley Low Rare at field level; floret sterility possible; ear tip blasting on very deficient soils Extremely sandy or very high pH (>7.5) soils only Generally not required; confirm by tissue test before applying

Boron in the plant: why growing points are affected first

Unlike nitrogen, phosphorus or potassium, boron is almost entirely phloem-immobile in most crop species — it cannot be retranslocated from established leaves to newly forming tissues. The plant must continuously take up B from the soil solution and deliver it to growing points via the xylem (water stream). This explains why B deficiency symptoms appear first in the youngest, most actively growing tissues — stem apex, flower buds, new leaves — not in older tissues where B is already locked into cell wall structure.

At the molecular level, B cross-links rhamnogalacturonan II (RGII) polysaccharide chains within pectin, forming a stabilised borate-diol ester. This cross-linking is critical for the mechanical integrity of the primary cell wall and for normal differentiation of meristematic cells. Without it, growing tissues develop abnormally — explaining hollow stem in OSR, heart rot in sugar beet, and poor pod set from failed pollen tube growth. See the zinc entry for comparison with another micronutrient involved in cell growth and the iron deficiency entry for contrast with a phloem-mobile micronutrient. The OSR nutrition management guide covers B within the full OSR nutrition programme.

Managing boron in the rotation

A boron management programme starts with soil testing — hot water-extractable B is the standard method; target >0.5 mg B/kg for OSR crops. On sandy or high-pH soils with a history of deficiency, preventative foliar Solubor at green bud (GS51) is the most cost-effective approach. Soil borax applications provide longer-term correction but require care to avoid toxicity (see FAQ below). Importantly, liming decisions affect B availability — a soil test taken before liming may show adequate B, but the resulting pH rise can create deficiency in the following season. Plan B management alongside the liming programme rather than treating it as a standalone problem. Leaching on sandy soils means B applied in autumn may not persist to serve a spring OSR crop; split foliar programmes in spring are more reliable on high-leaching sites.

Frequently asked questions

Why is oilseed rape particularly sensitive to boron deficiency?
Oilseed rape (OSR) is one of the most boron-demanding crops grown in the UK — it requires 150–300 g B/ha over the season, compared with 20–50 g B/ha for cereals. The sensitivity centres on boron's role in cell wall formation and pollen viability. Boron is almost immobile in the phloem of most crop species, meaning it cannot be retranslocated from older leaves to growing points — the plant must continuously absorb B from the soil solution. During rapid stem extension and pod development (GS4–6), demand exceeds supply on deficient soils. Hollow stem (internal rupture of rapidly elongating stem tissue due to inadequate cell wall B) and poor pod set (B required for pollen tube elongation, so fertilisation is reduced) are the two most economically important symptoms. AHDB RB209 section 7 ↗ covers OSR B requirements. See the OSR nutrition management guide for the full programme context.
What is Solubor and when should it be applied to oilseed rape?
Solubor (sodium tetraborate, ~20% B) is the most widely used foliar boron source — it dissolves readily in water and is applied at 100–200 g B/ha in 200–300 L/ha water. For oilseed rape, the recommended timing is green bud / early flower (GS51–61) — before the flowers open rather than after — because B is needed for pollen development inside the flower bud. Late applications at full flower have reduced efficacy. Two splits — one at green bud (GS51) and one at early yellow bud (GS57) — are used on high-risk crops (sandy soils, prior hollow stem history). Solubor can be tank-mixed with most fungicides applied at the same timing (check compatibility). On soils with known low B status, a soil application of borax (10–15 kg/ha, containing ~1.5 kg B/ha) at seedbed provides a season-long supply, though it is less commonly used than foliar Solubor due to the narrow margin between sufficiency and toxicity with soil applications.
What soils are at highest risk of boron deficiency?
The highest boron deficiency risk occurs on: (1) Sandy, coarse-textured soils — low total B reserves; rapid leaching of soluble borate during winter rainfall; (2) High-pH soils (>6.5–7.0) — B availability falls as pH rises above 6.5 because borate anions are increasingly adsorbed to iron and aluminium oxyhydroxides; (3) Recently limed soils — a pH rise from liming (even on a soil with adequate B before liming) rapidly reduces B availability; this can create deficiency symptoms in the season after liming; (4) Low organic matter soils — soil OM is the main long-term B reservoir; peat soils are an exception (OM holds B but may not release it readily); (5) Dry spring conditions — B reaches roots by mass flow and diffusion in the soil solution; a dry soil in spring drastically reduces B supply just as OSR is entering its most B-demanding growth stages. See the soil organic matter entry and the liming guide for the pH and OM context.
Is there a risk of boron toxicity when making soil applications?
Yes — boron has one of the narrowest margins between deficiency and toxicity of any essential micronutrient. In cereals (wheat, barley), the toxic soil B threshold is typically 1–2 mg B/kg (hot water extractable), while deficiency in OSR can occur below 0.3 mg/kg. The margin is less than an order of magnitude. Cereal toxicity symptoms include yellowing and burning of leaf tips, starting with the oldest leaves — often confused with potassium deficiency or nitrogen stress. Toxicity is most likely to occur if: soil borax is over-applied (>15 kg borax/ha = ~2.3 kg B/ha is already approaching the risk zone on sandy soils), applications are made repeatedly without soil testing, or if boron-rich industrial waste or compost is applied. Risk is higher on acid soils (pH <5.5), where B remains more available. Always use a soil B test before making soil applications and follow AHDB RB209 ↗ rate guidance to avoid over-application.
How does boron interact with calcium and cell wall formation?
Boron's primary function in plant cell walls is to cross-link two chains of rhamnogalacturonan II (RGII), a complex polysaccharide that is a component of pectin. This borate-RGII cross-link is essential for maintaining cell wall integrity and controlling the porosity of the wall to large molecules. Without adequate B, cell walls become fragile and over-expanded — plants cannot sustain normal cell division or differentiation in meristematic (rapidly dividing) tissues, which is why B deficiency first affects growing points rather than mature leaves. This interaction with cell wall structural polysaccharides also explains B's effect on root elongation, pollen tube formation and fruit/seed development — all depend on orderly cell expansion. Calcium is also involved in cell wall stability (via calcium pectate bridging), and there is a practical field observation that B and Ca deficiencies often co-occur on acidic sandy soils, though the mechanisms are separate. For the soil context see the soil pH entry and the zinc entry for comparison with another micronutrient affected by soil pH.