Key tomato diseases: overview
Step-by-step tomato disease management programme
- 1
Implement glasshouse hygiene and sanitation before and during the crop
Disease management in protected tomatoes starts before any seed is sown. Deep-clean glasshouses between crops: remove all plant debris (Botrytis sporulates on dead tissue), disinfect surfaces, benches and irrigation pipework. For Fusarium crown rot, steam sterilisation of growing media or use of certified clean substrate is essential — once Fusarium oxysporum f.sp. radicis-lycopersici is established in a substrate or border soil, it persists for years. Use new or steam-sterilised propagation compost. For ToBRFV biosecurity: dedicate tools per bay, implement strict entry protocols, use footbaths and gloves. Staff handling plants should wash hands frequently — ToBRFV is extraordinarily stable and transmits through contact alone. Never introduce plants from unverified sources.
- 2
Manage the glasshouse environment to reduce Botrytis and powdery mildew risk
Botrytis cinerea is favoured by relative humidity above 80–85% and temperatures of 17–25°C. The primary management tool is environmental: ventilate to reduce humidity, particularly at night when temperature drops can cause condensation. Morning ventilation is critical — opening vents before sunrise allows warm air to dry foliage before humidity peaks. Leaf pruning removes the dead tissue on which Botrytis sporulates and improves airflow. Avoid water splash during irrigation — drip irrigation reduces leaf wetness. Powdery mildew (Oidium neolycopersici) has opposite environmental requirements: high temperature (25–30°C) and low humidity below 50%. Sulphur vaporisation (where permitted) is a traditional glasshouse tool for powdery mildew. Monitor both diseases weekly and act early — established Botrytis populations can produce millions of spores from a single infected site.
- 3
Apply fungicides at appropriate timing for each disease target
Botrytis: no single fungicide is fully effective against modern Botrytis populations due to multi-site resistance. Use rotations across mode of action groups: SDHI fungicides (Group 7, e.g. boscalid), DMIs (Group 3), phenylpyrroles (fludioxonil), and anilinopyrimidines (cyprodinil). Begin applications at first flower cluster and continue at 7–14 day intervals during humid periods — never wait for symptoms before applying. For powdery mildew: DMI fungicides, sulphur, and potassium bicarbonate (for organic production) are the main options. Ensure full canopy coverage with appropriate nozzle selection and spray volume. Check current product approvals under the relevant UK PCA regulatory regime — product lists change; always verify current approvals before applying. Rotate modes of action to manage resistance.
- 4
Monitor and respond to late blight in outdoor and polytunnel tomatoes
Late blight (Phytophthora infestans) is the most destructive tomato disease in outdoor UK production. Disease progress is weather-driven — use the Hutton Criteria (two consecutive days with min temperature ≥10°C and ≥6 hours of relative humidity ≥90%) to assess risk. Alert services are available through Blight Management and AHDB Potato (shared pathogen with potato crops). Protective fungicide programmes on outdoor tomatoes: begin before flowering in years with high early-season risk; use multi-site active ingredients (chlorothalonil replacements such as copper-based products, fluazinam, mandipropamid) on a 7-day interval at high risk. Remove and destroy infected material immediately — do not compost. Resistant varieties (Ferline, Fantasio types) provide partial resistance but not immunity. Growing under plastic significantly reduces leaf wetness and late blight pressure.
- 5
Integrate biological controls and resistant varieties into a sustainable programme
Biological control organisms are increasingly important in UK protected tomato production, especially where chemical options are limited. For Botrytis: Trichoderma-based biofungicides, Gliocladium catenulatum (Prestop), and Bacillus subtilis products can be integrated into rotation programmes. Biofungicides are typically less consistent than synthetic products when disease pressure is high — use them during lower-risk periods or as part of alternating blocks. For ToBRFV: no effective chemical or biological control exists — resistant variety deployment is the primary management tool; check current AHDB/ADAS listings for ToBRFV-tolerant varieties. For Fusarium crown rot: Trichoderma-based soil treatments at transplanting, grafting onto resistant rootstocks (e.g. Maxifort) provides the most robust protection. Keep detailed spray and monitoring records — required for assurance schemes and useful for programme optimisation over time. See the <a href="/news/agriplant-2029">AgrIPlant 2029 event</a> for current IPM developments in protected crops.
The importance of resistance management
Protected tomato crops receive intensive fungicide programmes — often 20 or more applications per season. This creates strong selection pressure for fungicide resistance. Multi-site resistance in Botrytis cinerea is well documented in UK glasshouse populations: isolates with resistance to SDHI, DMI and phenylpyrrole fungicides simultaneously have been confirmed. The practical response is rigorous rotation across unrelated modes of action (FRAC groups), limiting consecutive applications of any single group to two, and integrating biological agents during lower-pressure periods. Record all fungicide applications with FRAC group codes — this enables informed rotation planning and is required by most assurance scheme auditors.
For virus management, no fungicide can help — ToBRFV and mosaic viruses require biosecurity and variety selection as the only tools. The AgrIPlant 2029 conference covers the latest ToBRFV-tolerant variety pipeline and IPM strategies for protected crops. See the IPM glossary entry for the broader framework context.