Harvest

Specific weight

Also: Hectolitre weight · bulk density (grain) · Unit: kg/hl

The mass of grain per unit volume, expressed in kilograms per hectolitre (kg/hl), used as a measure of grain quality and milling suitability.

Specific weight reflects how well the grain has filled during grain filling. Low specific weight indicates poor grain fill — from disease, drought, waterlogging or insufficient radiation during grain fill. Millers and maltsters pay premiums for grain meeting minimum specific weight thresholds: milling wheat typically requires ≥76 kg/hl; malting barley ≥63.5 kg/hl.

Minimum specific weight thresholds by crop

CropMinimumPremium statusNote
Milling wheat 76 kg/hl Yes — milling premium requires ≥76 kg/hl NABIM Group 1/2 spec; some mills accept 74 kg/hl for Group 4
Feed wheat 72 kg/hl Feed price only Below 72 kg/hl may attract a dock or rejection
Malting barley 63.5 kg/hl Malting premium requires ≥63.5 kg/hl Some malt specifications require ≥65 kg/hl
Feed barley 62 kg/hl Feed price only Check merchant specification
Winter oats 52 kg/hl Milling oats require higher — varies by buyer Oat specification varies widely by end use
Rye 71 kg/hl Bread rye specification varies Check current buyer specification

Specifications vary by buyer and season. Always check current merchant or processor specification before delivery.

The grain fill process and specific weight

Specific weight is fundamentally a measure of how completely the starchy endosperm has filled the grain. During the grain filling period — approximately GS71 to GS87 in Zadoks scale, covering 3–4 weeks post-anthesis — assimilates (primarily sucrose from current photosynthesis) are transported from the flag leaf and upper stem internodes to the developing grain endosperm. The process depends critically on:

  • Canopy health: the flag leaf, flag-1 leaf and ear contribute the majority of carbon for grain fill — any disease reducing photosynthetically active radiation (PAR) interception at these stages directly limits specific weight
  • Water availability: grain fill is water-limited under drought conditions — water stress triggers premature ripening (small, shrivelled grain)
  • Temperature: very high temperatures (>28°C) at grain fill accelerate development and reduce filling time, consistently reducing specific weight
  • Assimilate reserves: the stem acts as a temporary storage organ — crops with good pre-anthesis dry matter can partially buffer grain fill against late-season stress

Specific weight and grain contracts

Grain trade contracts specify minimum specific weight as a quality parameter. Delivery below the minimum triggers a price dock or rejection depending on the contract terms. For milling wheat, specific weight is one of four key criteria (alongside protein, Hagberg falling number and moisture) that determine eligibility for a milling premium. NABIM (National Association of British and Irish Millers) ↗ publishes wheat quality specifications for each flour miller group.

For malting barley, maltsters assess specific weight alongside grain nitrogen content and germination energy. Low specific weight malting barley is typically rejected or redirected to feed. AHDB malting barley quality guidance ↗ covers the full specification. See the harvest management guide for grain quality monitoring at the combine and the grain storage management guide for maintaining quality post-harvest.

Frequently asked questions

What causes low specific weight in wheat?
Low specific weight in wheat typically results from one or more of the following: (1) poor grain fill — caused by drought or heat stress in the 3–4 weeks after anthesis when the endosperm is filling; (2) early canopy senescence from disease — septoria, yellow rust or mildew reducing photosynthetically active leaf area during grain fill; (3) wet harvest conditions — grain that has been rewetted by rain after physiological maturity can shrink on drying, reducing specific weight; (4) sprouting in the ear — activates amylase enzymes that break down starch. See the PAR glossary entry on how radiation interception during grain fill drives grain filling, and the spring cereal disease forecast for disease risk context.
How is specific weight measured?
Specific weight is measured using a hectolitre balance (also called a Winchester bushel measure). A standard funnel fills a 1-litre or quarter-litre chamber with grain from a set height, and the chamber is weighed. The result is multiplied to express the weight in kg per 100 litres (kg/hl). Modern electronic grain analysers (e.g. Inframatic ↗, Perten ↗) measure specific weight alongside moisture in a single pass. At harvest, it is worth taking a sample from each field and measuring before delivery to know where you stand.
Is specific weight the same as bulk density?
The terms are related but not identical. Specific weight (or hectolitre weight) is measured by filling a standard container from a standard height under gravity — it is an industry measurement used for grain trade. Bulk density in a soil science context refers to the mass of dry soil per unit volume and is measured very differently. In grain physics, "bulk density" is sometimes used interchangeably with specific weight, but the standard trade measurement for grain is always hectolitre weight (kg/hl). For the soil science bulk density concept, see the soil sampling and testing guide.
Can I improve specific weight through agronomic management?
Specific weight is ultimately set by conditions during grain fill — a relatively short window of 3–4 weeks that cannot be rerun. However, agronomic decisions made earlier in the season significantly influence the outcome: (1) a healthy flag leaf — protected by a well-timed T2 fungicide (see the fungicide programme guide); (2) adequate sulphur — sulphur deficiency limits protein and starch accumulation; (3) late nitrogen at GS45 for milling quality; (4) avoid lodging — lodged crops have reduced PAR interception and poor grain fill. Variety choice also matters — AHDB Recommended List data includes specific weight performance.
What is the relationship between specific weight and TGW?
Both specific weight (SW) and thousand-grain weight (TGW) are grain quality metrics influenced by grain fill, but they measure different things. TGW measures the average mass of individual grains — it is a seed size/density measure used in seed rate calculations. Specific weight measures how efficiently grains pack into a given volume — it is influenced by both grain size and grain shape (plump grains pack more densely than shrivelled grains). A high-TGW grain can still have poor specific weight if grains are of low density (lightweight, airfilled), and vice versa. Both are routinely measured in AHDB variety trials.