Soil

Liming

Adding calcium-based material to raise soil pH.

Most field crops prefer a pH of 6.0–7.0. Below pH 5.5, aluminium and manganese become soluble and toxic; phosphate becomes less available; and biological activity slows. Ground limestone (calcium carbonate) is the standard material. The rate required depends on the target pH, current pH and soil buffer capacity — a soil test gives all three.

Liming materials compared

MaterialNeutralising valueSpeedNotes
Ground limestone (GLS) 50–55% Slow (12–18 months) Standard choice; most common in UK
Ground chalk 50–55% Medium (6–12 months) Softer material; fine particle size
Magnesian limestone 50–55% Slow Also supplies Mg; useful on Mg-deficient soils
Burnt/quicklime (CaO) 75–95% Fast Handling hazard; rapid pH change risk
Slaked lime (Ca(OH)₂) 70–80% Fast Used for rapid pH correction; higher cost

Why soils become acid

Soil acidification is a natural process accelerated by several farming inputs. Nitrogen fertilisers — particularly ammonium sulphate and urea — release hydrogen ions as they nitrify in soil, lowering pH. High rainfall leaches calcium and magnesium from the root zone. Organic matter decomposition and root respiration also generate carbonic acid. In intensive arable rotations without a liming programme, pH can fall by 0.1–0.3 units per year.

The AHDB liming guide ↗ gives typical acidification rates by soil type and cropping system. See the soil pH glossary entry for how pH affects nutrient availability across the pH range.

Calculating lime requirement

Lime requirement is expressed as tonnes of ground limestone equivalent (GLS) per hectare needed to raise the soil from its current pH to the target pH. The calculation requires the soil buffer capacity value from a soil test — not just pH. Sandy soils with low buffer capacity need less lime to achieve the same pH change as clay soils. RB209 ↗ Table 4 gives lime requirement data by soil type, current pH and target pH.

Neutralising value (NV) or neutralising equivalent (NE) is the key quality metric for lime products — it measures how much calcium carbonate equivalent is in each tonne. A product with NV 50% requires twice the weight to achieve the same pH rise as a product with NV 100%. Always compare on a cost-per-unit-NV basis, not price per tonne. See also the soil pH management guide for a practical framework and the NPK glossary entry for nutrient management context.

Liming and the Farming Rules for Water

Under the Farming Rules for Water ↗, lime applications must be appropriate to the crop requirement and planned to avoid run-off. Do not apply lime to waterlogged or frozen soil, or within 10 m of a watercourse. Records of lime applications — rate, material, NV, and reason — should be kept as part of your nutrient management plan.

Frequently asked questions

How do I know how much lime to apply?
Lime requirement depends on three factors: current soil pH, target pH for the intended crop, and the soil's buffer capacity (how hard it resists pH change). A soil test from an accredited laboratory provides all three values and calculates the lime requirement in tonnes of ground limestone per hectare. RB209 ↗ and the PLANET nutrient management tool ↗ both use soil test data to calculate lime requirement. Never apply lime based on pH alone — two soils with the same pH can have very different lime requirements depending on their texture and organic matter content.
What is the target soil pH for arable crops?
Most UK arable crops perform best at pH 6.5–7.0. Potatoes prefer a slightly lower pH (5.8–6.5) to reduce common scab risk. Grass prefers 6.0–6.5. Brassicas prefer 7.0+. Below pH 5.5, aluminium and manganese become soluble and toxic; phosphate availability falls sharply. Above pH 7.5, micronutrient deficiencies (iron, manganese, boron) increase. RB209 ↗ gives target pH by crop and soil type. See the soil pH glossary entry for a full explanation of the pH scale and its effects.
How long does lime take to work?
Ground limestone (the most common material) takes 12–18 months to fully react and raise pH. Apply at least one full growing season before the sensitive crop that requires the pH correction. For urgent corrections, slaked lime or ground chalk react faster (6–12 months). Apply before autumn ploughing or cultivation so tillage mixes lime into the active root zone. Avoid applying lime within 3 months of a nitrogen fertiliser application — ammonia losses increase. AHDB liming guidance ↗ covers application timing and product selection.
Can I apply lime and fertiliser at the same time?
No — lime and nitrogen fertilisers should not be applied simultaneously or within 3 months of each other. Lime raises soil pH, which increases the rate at which ammonium-N fertilisers lose ammonia as a gas (volatilisation). Wait at least 3 months between a lime application and the first nitrogen dressing, or apply nitrogen first and lime afterwards. Lime can be applied in the same season as phosphate or potash fertilisers without significant interaction.
How often do I need to re-lime?
Arable soils typically need re-liming every 4–10 years depending on soil type (sandy soils acidify faster than clays), rainfall (high rainfall leaches calcium), nitrogen fertiliser use (ammonium forms acidify soil) and cropping system. A pH test every 3–4 years alongside standard nutrient testing allows you to track change and apply lime before pH falls below critical thresholds. The AHDB liming guide ↗ provides maintenance lime rates by soil type and management system.